Dell PowerConnect 8024 User Manual page 250

Figure 6-119. sFlow Sampler Configuration
The sFlow Sampler Configuration page contains the following fields:
• Sampler DataSource— The sFlow data source for this sFlow sampler. This Agent supports physical
ports only.
• Receiver Index — The sFlow Receiver for this sFlow sampler. If set to zero, no packets will be sampled.
Only active receivers can be set. If a receiver expires, then all samplers associated with the receiver will
also expire. The allowed range is 1 to 8.
• Sampling Rate — The statistical sampling rate for packet sampling from this source. A sampling rate
of zero (0) disables sampling. The allowed range is 1024 to 65536.
• Maximum Header Size — The maximum number of bytes that should be copied from a sampled
packet. The allowed range is 20 to 256.
Displaying the sFlow Sampler Summary Table
1. Open the sFlow Sampler Configuration page
2. Click Show All.
The sFlow Sampler Summary page displays:
250
Configuring System Information
.