5. Complete the remaining fields.
6. Click Apply Changes.
The Stub Area information is saved and the device is updated.
Configuring OSPFv3 NSSA Area
1. Open the OSPFv3 Area Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes.
The web page reappears with Create Stub Area and NSSA Create buttons. See Figure 10-17.
4. Click NSSA Create on the OSPFv3 Area Configuration web page.
The web page reappears showing options for NSSA configuration.
Figure 10-19. OSPFv3 Area Configuration - NSSA
5. Complete the remaining fields.
6. Click Apply Changes.
The NSSA information is saved and the device is updated.
Deleting OSPFv3 Stub Area Information
1. Open the OSPFv3 Area Configuration page with configured Stub Area information.
2. Click Delete Stub Area.
3. Click Apply Changes.
631
Configuring IPv6