Dell PowerConnect 8024 User Manual page 761

Figure 12-36. PIM Interface Summary
The PIM Interface Summary page contains the following fields:
• Interface — Select the interface for which data is to be displayed. There must be configured at least
one router interface before displaying data for a PIM interface, otherwise an error message displays.
Interface Parameters fields are:
• Admin Mode — Displays the administrative status of PIM for the selected interface.
Protocol State — The operational state of the PIM protocol on this interface.
•
• IP Address — The IP address of the selected interface.
• Hello Interval — The frequency (in seconds) at which PIM hello messages are transmitted on the
selected interface.
• Join/Prune Interval — The frequency (in seconds) at which PIM Join/Prune messages are transmitted
on this PIM interface.
DR Priority — Indicates the DR priority on the PIM interface. This field is supported in PIM-SM only.
•
• BSR Border — Specifies the BSR border mode on the PIM interface. This field is not supported for
PIM-DM.
Designated Router — The designated router on the selected PIM interface. For point-to-point
•
interfaces, this is 0.0.0.0.
Interface Neighbors fields are:
Configuring IP Multicast
761