Tacacs+ Settings - Dell PowerConnect 8024 User Manual

Enable Password (8
•
privilege levels. The password appears in the ***** format.
Confirm Enable Password — Confirms the new Enable password. The password appears in the *****
•
format.
Defining Enable Passwords
1. Open the Enable Password page.
2. Specify the Enable password.
3. Confirm the Enable password.
4. Click Apply Changes.
The Enable password is set.
Defining Enable Passwords Using CLI Commands
For information about the CLI commands that perform this function, see the AAA Commands chapter
CLI Reference Guide.
in the
Table 6-29. Enable Passwords Commands
CLI Command
enable password

TACACS+ Settings

The device provide Terminal Access Controller Access Control System (TACACS+) client support.
TACACS+ provides centralized security for validation of users accessing the device.
TACACS+ provides a centralized user management system, while still retaining consistency with
RADIUS and other authentication processes. TACACS+ provides the following services:
• Authentication — Provides authentication during login and through user names and user-defined
passwords.
Authorization — Performed at login. Once the authentication session is completed, an authorization
•
session starts using the authenticated user name. The TACACS+ server checks the user privileges.
The TACACS+ protocol ensures network security through encrypted protocol exchanges between the
device and TACACS+ server.
The TACACS+ Settings page contains both user-defined and the default TACACS+ settings for the
inband management port.
To display the TACACS+ Settings page, click System → Management Security → TACACS+ in the tree
view.
64 characters) — The Enable password for controlling access to normal and
–
The following table summarizes the equivalent CLI commands you use.
Description
Sets a local password to control access to the normal level.
Configuring System Information
163