Version 1 Querier Timeout — The older MLD version 1 querier timeout value in
•
hours:minutes:seconds. The Older Version Querier Interval is the time-out for transitioning a host
back to MLD mode once an older version query is heard. When an older version query is received,
hosts set their Older Version Querier Present Timer to Older Version Querier Interval.
•
Proxy Start Frequency — The number of times the proxy was brought up.
Click Refresh to refresh the data on the screen with the present state of the data in the router.
Click Clear Statistics to clear the MLD Proxy Interface statistics and reset the counters to their original
values.
Displaying IPv6 MLD Proxy Summary Information Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
•
IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-29. IPv6 MLD Proxy Summary Command
CLI Command
show ipv6 mld-proxy
Interface Membership Information
The Interface Membership Information page lists each IP multicast group for which the MLD proxy
interface has received membership reports. To display this page, click IPv6 Multicast → MLD → Proxy
interface → Interface Membership Info in the navigation tree.
752
Configuring IP Multicast
Description
Displays a summary of the host interface status parameters.