The DHCP Relay Interface Summary table displays.
Figure 7-127. DHCP Relay Interface Summary
Configuring DHCP Relay With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
CLI Reference Guide
the
•
L2 DHCP Relay Agent Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-73. DHCP Relay Interface Configuration Commands
CLI Command
dhcp l2relay
dhcp l2relay trust
DHCP Relay Interface Statistics
Use this page to display statistics on DHCP Relay requests received on a selected port. To access this
page, click Switching → DHCP Relay → Interface Statistics in the tree view.
446
Configuring Switching Information
:
Description
Enables the Layer 2 DHCP Relay agent for an interface.
Configures an interface to trust a received DHCP Option 82.