Dell PowerConnect 8024 User Manual page 362

Modifying GVRP Parameters for Multiple Ports
1. Open the GVRP Global Parameters page.
2. Click Show All.
The GVRP Port Parameters Table displays.
3. Click Edit for each Interface/LAG to modify.
4. Edit the GVRP Port Parameter fields as needed.
5. Click Apply Changes.
The GVRP Port Parameter settings are modified, and the device is updated.
Configuring GVRP Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
• GVRP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-32. GVRP Commands
CLI Command
clear gvrp statistics
garp timer
gvrp enable (global)
gvrp enable (interface)
gvrp registration-forbid
gvrp vlan-creation-forbid
show gvrp configuration
show gvrp error-statistics
show gvrp statistics
362
Configuring Switching Information
:
Description
Clears all the GVRP statistics information.
Adjusts the GARP application join, leave, and leaveall GARP timer
values.
Enables GVRP globally.
Enables GVRP on an interface.
De-registers all VLANs, and prevents dynamic VLAN registration on
the port.
Enables or disables dynamic VLAN creation.
Displays GVRP configuration information,
whether GVRP and dynamic VLAN creation is enabled, and
which ports are running GVRP
Displays GVRP error statistics.
Displays GVRP statistics.
including timer values,