Etherlike Statistics
Use the Etherlike Statistics page to display interface statistics.
To display the page, click Statistics/RMON → Table Views → Etherlike Statistics in the tree view.
Figure 8-2. Etherlike Statistics
The Etherlike Statistics page contains the following fields:
•
Interface — Select physical interface (unit, port) or LAG interface for which statistics is displayed.
•
Refresh Rate — Specifies amount of time that passes before statistics are refreshed. The possible field
values are No Refresh, 15, 30 and 60 seconds. Default is No Refresh.
•
Frame Check Sequence (FCS) Errors — Displays number of FCS errors received on the selected
interface.
•
Signal Collision Frames — Displays number of signal collision frame errors received on the selected
interface.
•
Late Collisions — Displays number of late collisions received on the selected interface.
•
Excessive Collisions — Displays number of excessive collisions received on the selected interface.
•
Internal MAC Transmit Errors — Displays number of internal MAC transmit errors on the selected
interface.
•
Oversize Packets — Displays the total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well formed.
•
Internal MAC Receive Errors — Displays number of internal MAC received errors on the selected
interface.
458
Viewing Statistics and Remote Monitoring