Ospfv3 Stub Area Summary - Dell PowerConnect 8024 User Manual

OSPFv3 Stub Area Summary

Use the OSPFv3 Stub Area Summary page to display OSPFv3 stub area detail.
To display the page, click IPv6 → OSPFv3 → Stub Area Summary in the tree view.
Figure 10-20. OSPFv3 Stub Area Summary
The OSPFv3 Stub Area Summary page displays the following fields:
• Area ID — The Area ID of the Stub area.
• Metric Value — The metric value applied to the default route advertised into the area.
• Import Summary LSAs — Whether the import of Summary LSAs is enabled or disabled.
Displaying the OSPFv3 Stub Area Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-15. OSPFv3 Stub Area Summary Command
CLI Command
show ipv6 ospf stub table
Description
Displays the OSPF stub table.
633
Configuring IPv6