Setting A Static Address On The Management Interface - Dell PowerConnect 8024 User Manual

4. To configure an ip address of 10.256.24.64, with a netmask of 255.255.248.0, and a gateway of
10.256.24.1, type the following:
ip address 10.256.24.64 255.255.248.0 10.256.24.1
5. Type exit.
6. Type exit.
7. At the console# prompt, type show ip interface out-of-band and press <Enter>.

Setting a Static Address on the Management Interface

1. Type enable at the console> prompt, and press <Enter>.
2. At the console# prompt, type config and press <Enter>.
3. Type ip address none.
4. To configure an ip address of 10.256.24.64, with a netmask of 255.255.248.0, and a gateway of
10.256.24.1, type the following:
ip address 10.256.24.64 255.255.248.0
ip default-gateway 10.256.24.1
5. Type exit.
6. At the console# prompt, type show ip interface management and press <Enter>.
Using Dell™ OpenManage™ Switch Administrator
39