Removing a Rule
1. Open the Access Profile page.
2. Click Show All to display the Profile Rules Table page.
3. Select a rule.
4. Check the Remove check box.
5. Click Apply Changes.
The rule is removed, and the device is updated.
Defining Access Profiles Using CLI Commands
For information about the CLI commands that perform this function, see the Management ACL
Commands chapter in the
commands you use to define access profiles.
Table 6-23. Access Profiles Commands
CLI Command
management access-class
management access-list
permit (management)
show management access-class
show management access-list
Authentication Profiles
User authentication occurs locally and on an external server. Use the Authentication Profiles page to
select the user authentication method on the device.
To display the Authentication Profiles page, click System → Management Security → Authentication
Profiles in the tree view.
CLI Reference Guide
. The following table summarizes the equivalent CLI
Description
Defines which management access-list is used.
Defines a management access-list, and enters the access-list for
configuration.
Defines a permit rule.
Displays the active management access-list.
Displays management access-lists.
Configuring System Information
149