Dell PowerConnect 8024 User Manual page 767

Figure 12-41. SSM Range Configuration
The SSM Range Configuration page contains the following fields:
• SSM Group Address — Displays the Source-Specific Multicast (SSM) group IP address.
• SSM Group Mask — (IPv4) Displays the SSM group ip-address mask.
• SSM Prefix Length — (IPv6) Displays the source-specific multicast group Prefix Length.
• Remove — Select this option and click Apply Changes to remove the specified SSM Group IP
Addresses for the PIM router.
To configure the SSM Range, click the Add button to display the SSM Range Configuration page. Enter
values for the SSM Group Address and SSM Group Mask, click Apply Changes, then the Back button.
Adding an SSM Range
Use the Add SSM Range page to add the Source-Specific Multicast (SSM) Group IP Address and Group
Mask (IPv4) or Prefix Length (IPv6) for the PIM router.
1. Open the SSM Range Configuration page.
2. Click Add.
The Add SSM Range page displays.
Configuring IP Multicast
767