Displaying IP Statistics Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
•
IP Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-4. IP Statistics Command
CLI Command
show ip stats
IP Interface Configuration
Use the IP Interface Configuration page to update IP interface data for this switch. The IP interface
configuration includes the ability to configure the bandwidth, Destination Unreachable messages, and
ICMP Redirect messages.
To display the page, click Routing → IP → Interface Configuration in the tree view.
Figure 9-5. IP Interface Configuration
The IP Interface Configuration page contains the following fields:
496
Configuring Routing
Description
Displays IP statistical information