Dell PowerConnect 8024 User Manual page 205

Table 6-40. Captive Portal Configuration Commands
CLI Command
configuration
enable
group
interface
locale
name
protocol
redirect
redirect-url
session-timeout
verification
captive-portal client deauthenticate
show captive-portal client status
show captive-portal configuration client
status
show captive-portal interface client status Displays information about clients authenticated on all interfaces or a
show captive-portal interface configuration
status
clear captive-portal users
no user
show captive-portal user
user idle-timeout
user name
(continued)
Description
Enables the captive portal instance mode.
Globally enables captive portal.
Configures the group number for a captive portal configuration.
Associates an interface with a captive portal configuration.
Associates an interface with a captive portal configuration.
Configures the name for a captive portal configuration.
Configures the protocol mode for a captive portal configuration.
Enables the redirect mode for a captive portal configuration.
Configures the redirect URL for a captive portal configuration.
Configures the session timeout for a captive portal configuration.
Configures the verification mode for a captive portal configuration.
Deauthenticates a specific captive portal client.
Displays client connection details or a connection summary for
connected captive portal users.
Displays the clients authenticated to all captive portal configurations
or a to specific configuration.
specific interface.
Displays the clients authenticated to all captive portal configurations
or a to specific configuration.
Deletes all captive portal user entries.
Deletes a user from the local user database.
Displays all configured users or a specific user in the captive portal
local user database.
Sets the session idle timeout value for a captive portal user.
Modifies the user name for a local captive portal user.
Configuring System Information
205