Figure 6-24. Add DNS Server
3. Define the relevant fields.
4. Click Apply Changes.
The new DNS server is defined, and the device is updated.
Configuring DNS Servers Using CLI Commands
For information about the CLI commands that perform this function, see the IP Addressing Commands
CLI Reference Guide
chapter in the
use to configure DNS servers.
Table 6-16. DNS Servers Commands
CLI Command
ip domain-lookup
ip name-server
Default Domain Name
Use the Default Domain Name page to view and define default DNS domain names.
To display the Default Domain Name page, click System → IP Addressing → Default Domain Name.
Figure 6-25. Default Domain Name
. The following table summarizes the equivalent CLI commands you
Description
Use to enable IP DNS-based host name-to-address translation.
Configures available name servers.
Configuring System Information
133