Dell PowerConnect 8024 User Manual page 66

<186> JAN 01 00:00:15 0.0.0.0-1 UNKN[536870176]: bootos.c(218) 1 %
Event(0xaaaaaaaa)
Instantiating RamCP: as rawFs,
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x20001
Formatting...OK.
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
After the switch boots successfully, a prompt appears and you can use the local terminal to begin
configuring the switch. However, before configuring the switch, ensure that the software version installed
on the switch is the latest version. If it is not the latest version, download and install the latest version.
See "Software Download and Reboot."
66
Configuring Dell™ PowerConnect™
device = 0x20001