Dell PowerConnect 8024 User Manual page 753

User's guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Figure 12-31. Interface Membership Information
The Interface Membership Information page contains the following fields:
Interface — Displays the interface on which MLD proxy is enabled.
Multicast Group IP — Select the IP multicast group address for which data is to be displayed. If no
group membership reports have been received on the selected interface you will not be able to make
this selection, and none of the non-configurable data will be displayed.
Last Reporter — The IP address of the source of the last membership report received for the IP
Multicast group address on the MLD Proxy interface.
Uptime — The time elapsed since this entry was created. Displayed in hours:minutes:seconds.
State — The state of the host entry. A host can be in one of the following states:
Non-member. Does not belong to the group on the interface.
Delaying Member. Host belongs to the group on the interface and report timer is running. The
report timer is used to send out the reports.
Idle Member. Host belongs to the group on the interface and no report timer is running.
Configuring IP Multicast
753

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 8024f

Table of Contents