Dhcp Snooping Interface Configuration - Dell PowerConnect 8024 User Manual

Figure 7-114. DHCP Snooping Configuration
The DHCP Snooping Configuration page contains the following fields:
DHCP Snooping Mode — Enables or disables the DHCP Snooping feature. The default is Disable.
•
• MAC Address Validation — Enables or disables the validation of sender MAC Address for DHCP
Snooping. The default is Enable.
Configuring DHCP Snooping With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
CLI Reference Guide
the
• DHCP Snooping Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-65. DHCP Snooping Configuration Commands
CLI Command
ip dhcp snooping
ip dhcp snooping verify mac-address
show ip dhcp snooping

DHCP Snooping Interface Configuration

Use the DHCP Snooping Interface Configuration page to configure the DHCP Snooping settings on
individual interfaces.
:
Description
Enables DHCP snooping globally or on a specific VLAN.
Enables the verification of the source MAC address with the client
MAC address in the received DHCP message.
Displays the DHCP snooping global and per port configuration.
Configuring Switching Information
431