Dell PowerConnect 8024 User Manual page 510

2. Enter Area ID, IP Address, Subnet Mask, LSDB Type and Advertisement.
3. Click the Add check box.
4. Click Apply Changes.
The OSPF area range is defined and configured. All configured OSPF area ranges are displayed in the
table on the OSPF Area Range Configuration page.
Removing an OSPF Area Range Configuration
1. Open the OSPF Area Range Configuration page.
2. Select the Remove check box in the row of the Area ID to be deleted.
3. Click Apply Changes.
The address range is removed from the area configuration.
OSPF Area Range Configuration CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-9. OSPF Area Range Configuration Commands
CLI Command
area range
510
Configuring Routing
Description
Creates a specified area range for a specified NSSA.