Dell PowerConnect 8024 User Manual page 632

Deleting OSPFv3 NSSA Information
1. Open the OSPFv3 Area Configuration page with configured NSSA information.
2. Click NSSA Delete.
3. Click Apply Changes.
Configuring OSPFv3 Area Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-14. OSPFv3 Area Configuration Commands
CLI Command
area default-cost
area nssa
area nssa default-info-originate
area nssa no-redistribute
area nssa no-summary
area nssa translator-role
area nssa translator-stab-intv
area stub
area stub no-summary
show ipv6 ospf area
632
Configuring IPv6
:
Description
Configures the monetary default cost for the stub area.
Configures the specified areaid to function as an NSSA.
Configures the metric value and type for the default route advertised
into the NSSA.
Configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Configures the NSSA so that summary LSAs are not advertised into
the NSSA.
Configures the translator role of the NSSA.
Configures the translator stability interval of the NSSA.
Creates a stub area for the specified area ID.
Disables the import of Summary LSAs for the stub area identified by
areaid.
Displays information about the area.