Figure 7-101. LLDP-MED Interface Summary
Configuring LLDP-MED Interface Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
•
LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-54. LLDP MED Interface Commands
CLI Command
lldp med
lldp med confignotification
lldp med transmit-tlv
show lldp med interface
LLDP-MED Local Device Information
Use the LLDP-MED Local Device Information page to view the advertised LLDP local data for each
port.
Description
Enables/disables LLDP-MED on an interface.
Enables sending the topology change notification.
Specifies which optional TLVs in the LLDP MED set are transmitted
in the LLDPDUs.
Displays a summary of the current LLDP MED configuration for a
specific interface.
Configuring Switching Information
411