Authenticated Users - Dell PowerConnect 8024 User Manual

Table 7-1. 802.1x Authentication Commands
CLI Command
dot1x mac-auth-bypass
dot1x max-req
dot1x max-users
dot1x port-control
dot1x re-authenticate
dot1x re-authentication
dot1x system-auth-control
dot1x timeout quiet-period
dot1x timeout re-authperiod
dot1x timeout server-timeout
dot1x timeout supp-timeout
dot1x timeout tx-period
show dot1x
show dot1x ethernet
dot1x guest-vlan
dot1x unauth-vlan

Authenticated Users

The Authenticated Users page is used to display lists of ports that have authenticated users.
To display the Authenticated Users page, click Switching → Network Security → Authenticated Users in
the tree view.
274
Configuring Switching Information
Description
Enables MAB on an interface.
Sets the maximum number of times the switch sends an EAP-request
frame to the client before restarting the authentication process.
Sets the maximum number of clients supported on the port when
MAC-based 802.1X authentication is enabled on the port.
Enables manual control of the authorization state of the port.
Manually initiates a re-authentication of all 802.1x-enabled ports or a
specified 802.1X enabled port.
Enables periodic re-authentication of the client.
Enables 802.1X globally.
Sets the number of seconds the switch remains in the quiet state
following a failed authentication attempt
Sets the number of seconds between re-authentication attempts.
Sets the number of seconds the switch waits for a response from the
authentication server before resending the request.
Sets the number of seconds the switch waits for a response to an EAP-
request frame from the client before retransmitting the request.
Sets the number of seconds the switch waits for a response to an EAP-
request/identify frame from the client before resending the request.
Displays 802.1X status for the switch or the specified interface.
Shows the status of MAC Authentication Bypass.
Sets the guest VLAN on a port.
Specifies the unauthenticated VLAN on a port.