Dell PowerConnect 8024 User Manual page 129

Sending Logs to a Server
1. Open the Remote Log Server Settings page.
2. Define the UDP Port, Facility, and Description fields.
3. Select the log type and log severity by using the Log Parameters check boxes.
NOTE: When you select a severity level, all higher severity levels are automatically selected.
4. Click Apply Changes.
The log settings are saved, and the device is updated.
Adding a New Server
1. Open the Remote Log Server Settings page.
2. Click Add to display the Add Remote Log Server page.
NOTE: Before adding a new server, determine the IP address of the remote log server.
Figure 6-20. Add Remote Log Server Settings
3. Complete the fields in the dialog and click Apply Changes.
The Remote Log Server Settings page displays the server in the Log Server list only after you go back
to the Remote Log Server Settings page.
Viewing/Removing a Log Server
1. Open the Remote Log Server Settings page.
Configuring System Information
129