Dell PowerConnect 8024 User Manual page 529

Figure 9-17. OSPF Virtual Link Authentication Configuration
6. Select values for Authentication Type and Authentication Key.
7. Click Apply Changes when finished.
Configuring Virtual Link Data
1. Open the OSPF Virtual Link Configuration page.
2. Specify the area ID and neighbor router ID to configure.
3. Enter data into the fields as needed.
4. Click Configure Authentication to modify authentication.
5. Click Apply Changes when finished.
The virtual link data for the specified IDs is configured, and the device is updated.
Displaying Virtual Link Data
1. Open the OSPF Virtual Link Configuration page.
2. Specify the area ID and neighbor router ID to display.
The virtual link data for these IDs displays.
Removing a Virtual Link
1. Open the OSPF Virtual Link Configuration page.
2. Specify the Area ID and Neighbor Router ID associated with the virtual link to be removed.
Configuring Routing
529