Active Images - Dell PowerConnect 8024 User Manual

Figure 6-106. File System
The File System page contains the following fields:
File Name — A text field listing the names of the files on the file system.
•
• Image Description — A field 0-128 characters in length that displays an image description of the file.
• Size — Displays the size of the specified file in bytes.
• Remove — Select to remove the specified file.
Flash Memory Details — Displays Flash Memory availability details, in terms of total bytes of memory
•
used, and memory (in bytes) available.
Displaying the File System Using CLI Commands
For information about the CLI command that performs this function, see the Configuration and Image
File Commands chapter in the
command you use to display system files.
Table 6-48. File System Command
CLI Command
filedescr
show bootvar
show dir

Active Images

Use the Active Images page to set the boot image.
CLI Reference Guide
. The following table displays the equivalent CLI
Description
Adds a description to a file.
Displays the active system image file that the switch loads at startup.
Lists all the files available on the flash file system.
Configuring System Information
227