LLDP-MED Mode — Specifies the Link Layer Data Protocol-Media End Point (LLDP-MED) mode
•
for the selected interface. Enabling MED effectively enables the transmit and receive function of
LLDP.
•
Config Notification Mode — Specifies the LLDP-MED topology notification mode for the selected
interface.
Transmit TLVs — Specifies which optional type length values (TLVs) in the LLDP-MED will be
•
transmitted in the LLDP PDUs frames for the selected interface.
MED Capabilities — To transmit the capabilities TLV in LLDP frames.
–
–
Network Policy — To transmit the network policy TLV in LLDP frames.
–
Location Identification — To transmit the location TLV in LLDP frames.
–
Extended Power via MDI - PSE — To transmit the extended PSE TLV in LLDP frames.
Extended Power via MDI - PD — To transmit the extended PD TLV in LLDP frames.
–
–
Inventory — To transmit the inventory TLV in LLDP frames.
Modifying the LLDP-MED Interface Configuration
1. Open the LLDP Configuration page.
2. Specify the unit and select a port to configure, or select All to configure all ports with the same
settings.
3. Configure the LLDP-MED settings for the interface or interfaces
4. Click Apply Changes.
LLDP-MED parameters are saved to the switch.
NOTE: If you configured All ports, the settings you applied will not display after the page updates. Select a specific
interface or click Show All to view interface LLDP-MED settings.
Displaying the Interface Summary
1. Open the LLDP-MED Interface Configuration page.
2. Click Show All.
The LLDP-MED Interface Summary page displays and provides summary LLDP-MED information
for all interfaces:
410
Configuring Switching Information