Configuring OSPFv3 Area
1. Open the OSPFv3 Area Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes.
The configuration is saved and the device is updated.
The web page reappears with Create Stub Area and NSSA Create buttons.
Figure 10-17. OSPFv3 Area Configuration - Create Stub Area and NSSA Create
Configuring OSPFv3 Stub Area
1. Open the OSPFv3 Area Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes.
The web page reappears with Create Stub Area and NSSA Create buttons. See Figure 10-17.
4. Click Create Stub Area.
The Stub Area Information fields display.
Figure 10-18. OSPFv3 Stub Area Configuration
630
Configuring IPv6