Dell PowerConnect 8024 User Manual page 635

LSDB Type — The Link Advertisement type for the address range and area.
•
• Advertisement — The Advertisement mode for the address range and area.
• Delete — Click this check box to delete the specified OSPFv3 area range.
Configuring OSPFv3 Area Range
1. Open the OSPFv3 Area Range Configuration page.
2. Modify the fields as needed.
3. Click Apply Changes.
The OSPFv3 area range is saved, and the device is updated.
Configuring OSPFv3 Area Range Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-16. OSPFv3 Area Range Command
CLI Command
area range
show ipv6 ospf range
Description
Creates an area range for a specified NSSA.
Displays information about the area ranges for the specified area
identifier.
635
Configuring IPv6