Mld Routing Interface Source List Information - Dell PowerConnect 8024 User Manual

Expiry Time — The cache timer value which indicates the remaining lifetime in
•
hours:minutes:seconds for each entry.
Version1 Host Timer — The time in hours:minutes:seconds remaining until the local router assumes
•
that there are no longer any MLD version 1 members on the IP subnet attached to this interface.
When an MLDv1 membership report is received, this timer is reset to the group membership timer.
Compatibility — The compatibility mode (V1, V2) for this multicast group on the specified interface.
•
• Filter Mode — The source filter mode for the specified multicast group on this interface. Possible
values are Include, Exclude and NA. When NA mode is active, this field is blank.
Displaying IPv6 MLD Routing Cache Information Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-26. IPv6 MLD Routing Cache Information Command
CLI Command
show ipv6 mld groups

MLD Routing Interface Source List Information

The MLD Routing Interface Source List Information page displays detailed membership information
for an interface. You must configure at least one MLD router interface to access this page. Also, group
membership reports must have been received on the selected interface in order for data to be displayed
here. To access this page, click IPv6 Multicast → MLD → Routing Interface → Source List Information
in the navigation tree.
746
Configuring IP Multicast
Description
Displays information about multicast groups that MLD reported.