Sntp Server - Dell PowerConnect 8024 User Manual

Defining SNTP Authentication Settings Using CLI Commands
For information about the CLI commands that perform this function, see the Clock Commands chapter
CLI Reference Guide
in the
define SNTP authentication settings.
Table 6-9. SNTP Authentication Settings Commands
CLI Command
sntp authenticate
sntp authentication-key
sntp trusted-key

SNTP Server

Use the SNTP Server page to view and modify information for enabling SNTP servers, and to add new
SNTP servers.
To display the SNTP Server page, click System → SNTP → SNTP Server in the tree view.
Figure 6-13. SNTP Servers
The SNTP Servers page contains the following fields:
• SNTP Server — Selects user-defined SNTP server IP address from a drop-down menu. Up to eight
SNTP servers can be defined by using the Add button.
. The following table summarizes the equivalent CLI commands you use to
Description
Use to require server authentication for received Network Time
protocol (NTP) traffic.
Use to define an authentication key for SNTP .
Use to authenticate the identity of a system to which SNTP will
synchronize.
Configuring System Information
119