show copper-ports tdr
The show copper-ports tdr User EXEC mode command displays information on the last Time Domain
Reflectometry (TDR) test performed on copper ports.
•
show copper-ports tdr [interface]
•
interface — A valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
•
The maximum length of the cable for the TDR test is 120 meter.
Example
The following example displays information on the last TDR test performed on all copper ports.
Console> show copper-ports tdr
Port
Result
----
-------
1/e1
OK
1/e2
Short
1/e3
Test has not been performed
1/e4
Open
1/e5
OK
show copper-ports cable-length
The show copper-ports cable-length User EXEC mode command displays the estimated copper cable
length attached to a port.
Syntax
•
show copper-ports cable-length [interface]
•
interface — A valid Ethernet port. (Full syntax: unit/port)
278
PHY Diagnostics Commands
Length [meters]
--------
50
64
-
Date
-----
13:32:00 23 July 2005
13:32:00 23 July 2005
-