Show Connections - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show connections

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show connections
<brief | extensive>
<all | interface-switch | lsp-switch | p2mp-receive-switch | p2mp-transmit-switch |
remote-interface-switch>
<down | up | up-down>
<history>
<labels>
<logical-system (all | logical-system-name)>
<name>
<status>
show connections
<brief | extensive>
<all | interface-switch | lsp-switch | p2mp-receive-switch | p2mp-transmit-switch |
remote-interface-switch>
<down | up | up-down>
<history>
<labels>
<name>
<status>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about the configured circuit cross-connect (CCC) connections.
—Display the standard level of output for all configured CCC connections.
none
all —(Optional) Display all connections.
—(Optional) Display the specified level of output. Use history to display
brief | extensive
information about connection history. Use labels to display labels used for transmit
and receive LSPs. Use status to display information about the connection and
interface status.
interface-switch —(Optional) Display interface switch connections only.
—(Optional) Display LSP switch connections only.
lsp-switch
p2mp-receive-switch —(Optional) Display point-to-multipoint LSP to local interfaces
switch connections only.
—(Optional) Display local interface to point-to-multipoint LSP
p2mp-transmit-switch
switch connections only.
—(Optional) Display remote interface switch connections only.
remote-interface-switch
down | up | up-down —(Optional) Display nonoperational, operational, or both kinds of
connections.
—(Optional) Display information about connection history.
history
Chapter 126: Operational Mode Commands for MPLS
3455