Show Link-Management Statistics; Table 460: Show Link-Management Routing Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
show link-management routing
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 460: show link-management routing Output Fields

Field Name Field Description
Peer Name Name of the peer.
System identifier Internal identifier for the peer. The range of values is
State State of the peer:
Control address Address to which a control channel is established.
Interface over which control packets are sent.
Control channel
3468
®
OS for EX Series Ethernet Switches, Release 10.3
show link-management routing
<peer <name name> | te-link <name name>>
<resource <name name>>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display Multiprotocol Label Switching (MPLS) peer or traffic engineering link information
from the routing process.
none —Display all peer and traffic-engineered link information.
—(Optional) Display information for all peers or for the specified peer
peer <name name>
only.
resource <name name> —(Optional) Display information for all resources or for the specified
resource only.
—(Optional) Display information for all traffic-engineered forwarding
te-link <name name>
paths or for the specified path only.
view
show link-management on page 3462
show link-management peer on page 3466
show link-management statistics on page 3471
show link-management te-link on page 3473
show link-management routing on page 3470
Table 460 on page 3468 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Up or Down .
show link-management routing
0 through 64,000 .
Copyright © 2010, Juniper Networks, Inc.