Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3816

Complete Software Guide for Junos
Table 498: show services rpm probe-results Output Fields (continued)
Field Name Field Description
Probes are grouped into tests, and the statistics are calculated for each test. If a test contains 10
Results over current
probes, the average, minimum, and maximum results are calculated from the results of those 10
test
probes. If the command is issued while the test is in progress, the statistics use information from the
completed probes.
Results over last test Results for the most recently completed test. If the command is issued while the first test is in progress,
this information is not displayed
3720
®
OS for EX Series Ethernet Switches, Release 10.3
Probes sent —Number of probes sent within the current test.
—Number of probe responses received within the current test.
Probes received
—Percentage of lost probes for the current test.
Loss percentage
—Measurement type. Possible values are round-trip time, positive round-trip jitter,
Measurement
negative round-trip jitter, egress time, positive egress jitter, negative egress jitter, ingress time,
positive ingress jitter, negative ingress jitter, and, for the probe type
egress delay and ingress delay.
For each measurement type, the following individual calculated results are provided:
—Number of probes.
Samples
—Minimum RTT, ingress delay, or egress delay measured over the course of the current
Minimum
test.
—Maximum RTT, ingress delay, or egress delay measured over the course of the current
Maximum
test.
—Average RTT, ingress delay, or egress delay measured over the course of the current
Average
test.
Peak to peak —Peak-to-peak difference, in microseconds.
Stddev —Standard deviation, in microseconds.
Sum —Statistical sum.
Probes sent —Number of probes sent for the most recently completed test.
Probes received —Number of probe responses received for the most recently completed test.
—Percentage of lost probes for the most recently completed test.
Loss percentage
—Time the most recent test was completed.
Test completed
—Measurement type. Possible values are round-trip time, positive round-trip jitter,
Measurement
negative round-trip jitter, egress time, positive egress jitter, negative egress jitter, ingress time,
positive ingress jitter, negative ingress jitter, and, for the probe type
egress delay and ingress delay.
For each measurement type, the following individual calculated results are provided:
—Number of probes.
Samples
—Minimum RTT, ingress delay, or egress delay measured for the most recently completed
Minimum
test.
—Maximum RTT, ingress delay, or egress delay measured for the most recently
Maximum
completed test.
—Average RTT, ingress delay, or egress delay measured for the most recently completed
Average
test.
Peak to peak —Peak-to-peak difference, in microseconds.
Stddev —Standard deviation, in microseconds.
—Statistical sum.
Sum
, the
icmp-ping-timestamp
, the
icmp-ping-timestamp
Copyright © 2010, Juniper Networks, Inc.