Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3905

Table 503: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Number of CCMs received out of sequence.
CCMs received out of
sequence
Number of loopback messages (LBMs) sent.
LBMs sent
Number of loopback response messages (LBRs) received that were valid messages and in sequence.
Valid in-order LBRs
received
Number of LBRs received that were valid messages and not in sequence.
Valid out-of-order LBRs
received
LBRs received with Number of LBRs received that were corrupted.
corrupted data
LBRs sent Number of LBRs transmitted.
LTMs sent Linktrace messages (LTMs) transmitted.
LTMs received Linktrace messages received.
LTRs sent Linktrace responses (LTRs) transmitted.
Linktrace responses received.
LTRs received
Sequence number of the next linktrace message request to be transmitted.
Sequence number of
next LTM request
1DMs sent If the MEP is an initiator for a one-way ETH-DM session: Number of one-way delay measurement
(1DM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a receiver for a one-way ETH-DM session: Number of valid 1DM frames received.
Valid 1DMs received
For all other cases, this field displays
If the MEP is a receiver for a one-way ETH-DM session: Number of invalid 1DM frames received.
Invalid 1DMs received
For all other cases, this field displays
If the MEP is an initiator for a two-way ETH-DM session: Number of Delay Measurement Message
DMMs sent
(DMM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a responder for a ETH-DM session: Number of Delay Measurement Reply (DMR) frames
DMRs sent
sent.
For all other cases, this field displays
Copyright © 2010, Juniper Networks, Inc.
Chapter 132: Ethernet OAM Connectivity Fault Management
.
0
.
0
.
0
.
0
.
0
3809