Interval; Location - Juniper JUNOS OS 10.3 - SOFTWARE Manual

interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

location

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interval seconds;
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Interval between samples.
seconds —Time between samples, in seconds.
Range: 1 through 2,147,483,647 seconds
Default: 60 seconds
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Interval
location location;
[edit snmp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Define the value of the MIB II
managed system.
—Location of the local system. You must enclose the name within quotation
location
marks (" ").
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the System Location for a Device Running JUNOS Software
sysLocation object, which is the physical location of the
Chapter 129: SNMP
3629