Falling-Threshold-Interval; Filter-Duplicates - Juniper JUNOS OS 10.3 - SOFTWARE Manual

falling-threshold-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

filter-duplicates

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
falling-threshold-interval seconds;
[edit snmp rmon alarm index]
Statement introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Interval between samples when the rising threshold is crossed. Once the alarm crosses
the falling threshold, the regular sampling interval is used.
seconds —Time between samples, in seconds.
Range: 1 through 2,147,483,647 seconds
Default: 60 seconds
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Falling Threshold Interval
interval on page 3629
filter-duplicates;
[edit snmp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Filter duplicate Get , GetNext
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Filtering Duplicate SNMP Requests
, or GetBulk SNMP requests.
Chapter 129: SNMP
3623