Configuring Ethernet Oam Connectivity Fault Management - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos
Sample Output
Meaning
Related
Documentation

Configuring Ethernet OAM Connectivity Fault Management

Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure)
3768
®
OS for EX Series Ethernet Switches, Release 10.3
Interface name: ge-1/0/1.0, Interface status: Active, Link status: Up
Maintenance domain name: private, Format: string, Level: 0
Maintenance association name: private-ma, Format: string
Continuity-check status: enabled, Interval: 1ms, Loss-threshold: 3 frames
MEP identifier: 100, Direction: down, MAC address: 00:90:69:0b:4b:94
MEP status: running
Defects:
Remote MEP not receiving CCM
Erroneous CCM received
Cross-connect CCM received
RDI sent by some MEP
Statistics:
CCMs sent
CCMs received out of sequence
LBMs sent
Valid in-order LBRs received
Valid out-of-order LBRs received
LBRs received with corrupted data
LBRs sent
LTMs sent
LTMs received
LTRs sent
LTRs received
Sequence number of next LTM request
Remote MEP count: 2
Identifier
MAC address
2001
00:90:69:0b:7f:71
When the output displays continuity-check status is
remote MEP, it means that connectivity fault management (CFM) has been configured
properly.
Understanding Ethernet OAM Connectivity Fault Management for an EX Series Switch
on page 3763
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 3768
Ethernet interfaces on Juniper Networks EX Series Ethernet Switches and Juniper Networks
Junos OS for EX Series switches support the IEEE 802.1ag standard for Operation,
Administration, and Management (OAM). The IEEE 802.1ag specification provides for
Ethernet connectivity fault management (CFM).
This topic describes these tasks:
Creating the Maintenance Domain on page 3769
1.
Configuring the Maintenance Domain MIP Half Function on page 3769
2.
: no
: yes
: no
: yes
: 76
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
State
Interface
ok
ge-0/2/5.0
enabled
and displays details of the
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents