Show Mpls Lsp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show mpls lsp

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show mpls lsp
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<defaults>
<descriptions>
<down | up>
<logical-system (all | logical-system-name)>
<lsp-type>
<name name>
<p2mp>
<statistics>
<transit>
show mpls lsp
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<descriptions>
<down | up>
<lsp-type>
<name name>
<p2mp>
<statistics>
<transit>
Command introduced before Junos OS Release 7.4.
option added in Junos OS Release 8.5.
defaults
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about configured and active dynamic Multiprotocol Label Switching
(MPLS) label-switched paths (LSPs).
—Display standard information about all configured and active dynamic MPLS LSPs.
none
brief | detail | extensive | terse
extensive option displays the same information as the detail option, but covers the
most recent 50 events.
bidirectional | unidirectional
information, respectively.
—(Optional) Display LSPs used for protecting other LSPs.
bypass
defaults —(Optional) Display the MPLS LSP default settings.
—(Optional) Display the MPLS label-switched path (LSP) descriptions. To
descriptions
view this information, you must configure the description statement at the
protocol mpls lsp] hierarchy level. Only LSPs with a description are displayed. This
Chapter 126: Operational Mode Commands for MPLS
—(Optional) Display the specified level of output. The
—(Optional) Display bidirectional or unidirectional LSP
[edit
3483