Label-Switched-Path - Juniper JUNOS OS 10.3 - SOFTWARE Manual

label-switched-path

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
label-switched-path lsp-name to remote-provider-edge-switch;
[edit protocols mpls]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Define a label-switched path (LSP) to the remote provider edge switch to use for MPLS
traffic. You must specify this statement on the provider edge switch.
lsp-name —Name that identifies the LSP. The name can be up to 32 characters and can
contain letters, digits, periods, and hyphens. To include other characters, enclose
the name in quotation marks. The name must be unique on the ingress switch.
remote-provider-edge-switch
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring MPLS on EX Series Switches on page 3365
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
Chapter 125: Configuration Statements for MPLS
—Either the loopback address or the switch address.
3425