Notify-Filter (Applying To The Management Target) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

notify-filter (Configuring the Profile Name)
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

notify-filter (Applying to the Management Target)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
notify-filter profile-name {
oid oid (include | exclude);
}
[edit snmp v3]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Define a group of MIB objects on which to define access. The notify filter limits the type
of traps or informs sent to the NMS.
—Name assigned to the notify filter.
profile-name
The remaining statement is explained separately.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Trap Notification Filter
oid on page 3635
notify-filter profile-name;
[edit snmp v3 target-parameters target-parameters-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the notify filter to be used by a specific set of target parameters.
profile-name —Name of the notify filter to apply to notifications.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Applying the Trap Notification Filter
Chapter 129: SNMP
3633