Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3815

Table 498: show services rpm probe-results Output Fields (continued)
Field Name Field Description
(BGP neighbor discovery) Name of the configured (if any) routing instance, logical system name, or
Routing Instance Name
both, in which the probe is configured:
Probe results Raw measurement of a particular probe sample done by a remote host. This data is provided separately
from the calculated results. The following information is contained in the raw measurement:
Copyright © 2010, Juniper Networks, Inc.
When a routing instance is defined within a logical system, the logical system name is followed by
the routing instance name. A slash
routing instance called is configured within the logical system called
R1
field is .
LS/R1
When a routing instance is configured but the default logical system is used, the name in the output
field is the name of the routing instance.
When a logical system is configured but the default routing instance is used, the name in the output
field is the name of the logical system followed by
entities. For example,
LS/default
Response received —Timestamp when the probe result was determined.
Client and server hardware timestamps
point.
—Average ping round-trip time (RTT), in microseconds.
Rtt
—Egress jitter, in microseconds.
Egress jitter
—Ingress jitter, in microseconds.
Ingress jitter
—Round-trip jitter, in microseconds.
Round trip jitter
Egress interarrival jitter —Egress interarrival jitter, in microseconds.
—Ingress interarrival jitter, in microseconds.
Ingress interarrival jitter
—Round-trip interarrival jitter, in microseconds.
Round trip interarrival jitter
Chapter 130: Real-Time Performance Monitoring (RPM)
is used to separate the two entities. For example, if the
( / )
. A slash (
default
.
—If timestamps are configured, an entry appears at this
, the name in the output
LS
) is used to separate the two
/
3719