Ping Mpls Rsvp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

ping mpls rsvp

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
ping mpls rsvp
<lsp-name>
<count count>
<destination address>
<detail>
<dynamic-bypass>
<egress egress-address>
<exp forwarding-class>
<interface interface-name>
<logical-system (all | logical-system-name)>
<manual-bypass>
<multipoint>
<size bytes>
<source source-address>
<standby standby-path-name>
<sweep>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
The and
egress multipoint
The size and sweep options were introduced in Junos OS Release 9.6.
The and
dynamic-bypass
10.2.
Check the operability of MPLS RSVP-signaled label-switched path (LSP) connections.
Type Ctrl+c to interrupt a ping mpls
—(Optional) Number of ping requests to send. If
count count
requests are sent. The range of values is
.
5
—(Optional) Specify an address other than the default (
destination address
for the ping echo requests. The address can be anything within the
—(Optional) Display detailed information about the echo requests sent and received.
detail
NOTE: When using the
system time configured on the local and remote routers. Differences in
these system times can result in an inaccurate one way ping trip times
being reported.
—(Optional) Ping dynamically generated bypass LSPs, used for protecting
dynamic-bypass
other LSPs.
egress egress-address —(Optional) Only the specified egress router or switch responds to
the ping request.
Chapter 126: Operational Mode Commands for MPLS
options were introduced in Junos OS Release 9.2.
options were introduced in Junos OS Release
manual-bypass
command.
1 through
option, the reported time is based on the
detail
is not specified, five ping
count
1,000,000 . The default value is
127.0.0.1/32
127/8 subnet.
)
3449