Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3689

collector
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
disable
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
collector {
ip-address;
udp-port port-number;
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure a remote collector for sFlow network traffic monitoring. The switch sends
sFlow UDP datagrams to this collector for analysis. You can configure up to four collectors
on the switch. You configure a collector by specifying its IP address and a UDP port.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
disable;
[edit protocols sflow],
[edit protocols sflow interfaces interface-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Disable the sFlow monitoring protocol on all interfaces on the switch or on the specified
interface.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
Chapter 128: sFlow Monitoring Technology
3593