Sample-Type; Routing-Instance - Juniper JUNOS OS 10.3 - SOFTWARE Manual

routing-instance

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

sample-type

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
routing-instance routing-instance-name;
[edit snmp v3 target-address target-address-name]
Statement introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify a routing instance for an SNMPv3 trap target.
routing-instance-name —Name of the routing instance.
To configure a routing instance within a logical system, specify the logical system name
followed by the routing instance name. Use a slash (
(for example, test-ls/test-ri
system, specify the logical system name followed by
).
test-ls/default
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Trap Target Address
sample-type (absolute-value | delta-value);
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Method of sampling the selected variable.
—Actual value of the selected variable is used when comparing against
absolute-value
the thresholds.
—Difference between samples of the selected variable is used when comparing
delta-value
against the thresholds.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Sample Type
/
). To configure the default routing instance on a logical
default
Chapter 129: SNMP
) to separate the two names
(for example,
3643