Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3582

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 469: show mpls lsp Output Fields (continued)
Field Name
Field Description
Number of active routes (prefixes) installed in the routing table. For ingress
Rt
RSVP sessions, the routing table is the primary IPv4 table (
and egress RSVP sessions, the routing table is the primary MPLS table (mpls.0).
ActivePath
(Ingress LSP) Name of the active path:
FastReroute
Fast reroute has been requested by the ingress routing device.
desired
Link protection has been requested by the ingress routing device.
Link protection
desired
(Ingress LSP) CSPF load-balancing rule that was configured to select the LSP's
LoadBalance
path among equal-cost paths
Signal type
Signal type for GMPLS LSPs. The signal type determines the peak data rate for
the LSP:
Encoding type
LSP encoding type:
Switching type
Type of switching on the links needed for the LSP:
or
PSC-1
GPID
Generalized Payload Identifier (identifier of the payload carried by an LSP):
,
HDLC
Configured protection capability desired for the LSP:
Protection
One plus one
Upstream label in
(Bidirectional LSPs) Incoming label for reverse direction traffic for this LSP.
(Bidirectional LSPs) Outgoing label for reverse direction traffic for this LSP.
Upstream label out
(Bidirectional LSPs) Label the upstream node suggests to use in the Resv
Suggested label
message that is sent.
received
Suggested label
(Bidirectional LSPs) Label the downstream node suggests to use in the Resv
message that is returned.
sent
Autobandwidth
(Ingress LSP) The LSP is performing autobandwidth allocation.
MinBW
(Ingress LSP) Configured minimum value of the LSP, in bps.
MaxBW
(Ingress LSP) Configured maximum value of the LSP, in bps.
AdjustTimer
(Ingress LSP) Configured value of the bandwidth adjustment timer, indicating
the total amount of time allowed before bandwidth adjustment will take place,
in seconds.
3486
®
OS for EX Series Ethernet Switches, Release 10.3
: Most-fill
DS0
,
DS3
,
STS-1
,
STM-1
, or
STM-4
Packet
,
Ethernet
.
,
,
, or
Ethernet
IPv4
PPP
Unknown
,
One to one
, or
Shared
.
). For transit
inet.0
Primary
or
Secondary
.
,
Least-fill
, or
Random
.
.
,
PDH
,
SDH/SONET
,
Lambda
, or
Fiber
,
Lamda
,
Packet
.
,
Extra
Enhanced
Level of Output
brief
detail extensive
detail
detail
detail extensive
All levels
Fiber
.
All levels
,
TDM
,
All levels
All levels
,
,
All levels
none
All levels
All levels
All levels
All levels
detail extensive
detail extensive
detail extensive
detail extensive
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents