Loss-Threshold (Ex Series Switch Only) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

loss-threshold (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
loss-threshold number;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name continuity-check]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the number of continuity check messages that can be lost before the remote
MEP is marked as down.
—Number of continuity check messages that can be lost before the remote MEP
number
is marked down.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 3768
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
Chapter 132: Ethernet OAM Connectivity Fault Management
3787