Show Services Rpm Active-Servers; Table 496: Show Services Rpm Active-Servers Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show services rpm active-servers

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show services rpm show services rpm
active-servers active-servers
3714
®
OS for EX Series Ethernet Switches, Release 10.3
show services rpm active-servers
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the protocols and corresponding ports for which a router or switch is configured
as a real-time performance monitoring (RPM) server.
This command has no options.
view
show services rpm active-servers on page 3714
Table 496 on page 3714 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 496: show services rpm active-servers Output Fields

Field Name
Protocol
Port
Destination interface name
user@host> show services rpm active-servers
Protocol: TCP, Port: 50000, Destination interface name: lt-0/0/0.0
Protocol: UDP, Port: 50001, Destination interface name: lt-0/0/0.0
show services rpm active-servers
Field Description
Protocol configured on the receiving probe server. The protocol can
be the User Datagram Protocol (UDP) or the Transmission Control
Protocol (TCP).
Port configured on the receiving probe server.
Output interface name for the probes.
Copyright © 2010, Juniper Networks, Inc.