Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3837

allow-remote-loopback
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
allow-remote-loopback;
[edit protocols oam ethernet link-fault-management interface interface-name]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Advertise that the interface is capable of getting into loopback mode. Enable remote
loopback in Ethernet OAM link fault management (LFM) on all Ethernet interfaces or the
specified interface on the EX Series switch.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Ethernet OAM Link Fault Management on EX Series Switches
on page 3727
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
Chapter 131: Ethernet OAM Link Fault Management
3741