Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3904

Complete Software Guide for Junos
Table 503: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Maintenance domain name format configured.
Format (Maintenance
domain)
Maintenance domain level configured.
Level
Maintenance association name.
Maintenance
association name
Maintenance association name format configured.
Format (Maintenance
association)
Continuity-check Continuity-check status.
status
Interval Continuity-check message interval.
MEP identifier Maintenance association end point (MEP) identifier.
Direction MEP direction configured.
MAC address MAC address configured for the MEP.
Whether automatic discovery is enabled or disabled.
Auto-discovery
Priority used for CCMs and linktrace messages transmitted by the MEP.
Priority
Interface identifier.
Interface name
Local interface status.
Interface status
Local link status.
Link status
Whether the remote MEP is not receiving CCMs.
Remote MEP not
receiving CCM
Whether erroneous CCMs have been received.
Erroneous CCM
received
Whether cross-connect CCMs have been received.
Cross-connect CCM
received
RDI sent by some MEP Whether the remote defect indication (RDI) bit is set in messages that have been received. The
absence of the RDI bit in a CCM indicates that the transmitting MEP is receiving CCMs from all
configured MEPs.
Number of CCMs transmitted.
CCMs sent
3808
®
OS for EX Series Ethernet Switches, Release 10.3
Copyright © 2010, Juniper Networks, Inc.